93daytona

Since I only have a pair of 5 1/4" clarions up front right now, and my sub amp is in my g/f's car until I get her a 4 channel amp to run everything, I decided to make a new fiberglass box for a single one of my e8a's. It's going in the back passengers side corner above the jack, and it'll be running off the rear channels of my JL 300/4. Once I get my new front stage installed, and get my sub amp back, I'll be throwing my old box for the 3 8a's back in.

Fiberglass drying:


Here's the mounting ring with the sub test fitted. The jasper circle jig makes it SO easy to cut out perfect circles.



Here's the mold after the bottom edge was trimmed, and the base was glassed on. The mounting ring is propped up to give an idea of how it will be mounted.


I ran out of resin today, So tommorow I'll be laying down another layer or two of fiberglass mat on the mold, then the ring will get mounted and the front will get glassed.

__________________
Eclipse :: JL :: Hifonics :: Image Dynamics :: Peerless :: Elemental Designs

http://www.cardomain.com/memberpage/762589/1