Zmods.org Forums - To start the ball rolling

06-23-2007, 11:53 PM	#1
yellazed Newbie Join Date: Dec 2006 Posts: 2	To start the ball rolling I was surprised to see that there are no posts for the early Zs, so I thought I'd start one by introducing myself, a member from Downunder. For anybody interested, I have 2 x 300ZXs and 1 x 1974 26OZ, although I jokingly refer to it as a REAL 350Z, as it has a 350 sbc installed. I may well be flamed by the purists for not having a stock 260Z, but that's OK. [IMG][/IMG] I am about to fit a Tremec T56 to the 260Z in place of the 350 Auto it has at present. Wondering if anyone here has done this as there are a few challenges. Appreciate any experience from others on appropriate flywheel, clutch master cylinder, etc, (e.g. the T56 uses the hydraulic throw-out bearing). Cheers, Wal F Last edited by yellazed : 06-23-2007 at 11:59 PM.
Offline:

06-24-2007, 10:46 AM	#2
tnkrstoyco Super Moderator Join Date: Aug 2005 Location: Springdale, Arkansas Car Specs: 93 300zx vert, 05 350AE Posts: 249	Re: To start the ball rolling You might want to check hybridz.org I think it is. they'd probably have more info on the change out. __________________ "Life isn't like a bowl of cherries, it's more like a jar of Jalapenos-- what you do today, might burn your ass tomorrow......" "Always do right. This will gratify some people and astonish the rest." - Mark Twain The R35 GT-R community and 2008 GT-R Nationals host: NissanGTRclub.com
Offline:

05-06-2009, 10:01 PM	#3
300zxboard.com 300ZX Discussion Board Join Date: May 2009 Location: San Diego, CA Car Specs: 1990-1996 Nissan 300ZX Twin Turbo Posts: 10	Re: To start the ball rolling Good looking collection you've got there! __________________ 1992 Aztec Red Slicktop TTZ Conversion In Progress 300ZX Discussion Forums \| http://www.300ZXBoard.com The Z Driver Website \| http://www.ZDriver.net
Offline:

07-16-2009, 09:35 PM

drewtiss

Member

Join Date: Mar 2009

Posts: 35

Re: To start the ball rolling

Quote:

Originally Posted by yellazed

I was surprised to see that there are no posts for the early Zs, so I thought I'd start one by introducing myself, a member from Downunder.

For anybody interested, I have 2 x 300ZXs and 1 x 1974 26OZ, although I jokingly refer to it as a REAL 350Z, as it has a 350 sbc installed. I may well be flamed by the purists for not having a stock 260Z, but that's OK.

[IMG]

[/IMG]

I am about to fit a Tremec T56 to the 260Z in place of the 350 Auto it has at present. Wondering if anyone here has done this as there are a few challenges.

Appreciate any experience from others on appropriate flywheel, act clutch master cylinder, etc, (e.g. the T56 uses the hydraulic throw-out bearing).

Cheers,

Wal F

Is this up? Can you show us more albums or some images available on line. If you have a blog about this I would like to read it as well.

Offline:

07-16-2009, 09:57 PM	#5
tnkrstoyco Super Moderator Join Date: Aug 2005 Location: Springdale, Arkansas Car Specs: 93 300zx vert, 05 350AE Posts: 249	Re: To start the ball rolling Drew, why don't you sign in at www.300zxclub.com we only use this site for back up. If you do be sure and fill out all your information for the profile.
Offline:

07-16-2009, 10:32 PM