10-30-05 - Bay Paint Prep Stage 2

[TC]

I removed the remaining items that can be removed for further bay painting preparation. I was unable to remove the master relay box, front master harness, and the fusible link box. They're loose enough and have enough harness to easily work around them though. I've removed all the oil and gunk, and have removed the shiney surface on all the painted surfaces. I still have one more stage of prep before I turn it over to my body guy for final prep, taping it off, and painting it. There's a couple rough spots that he'll have to make perfect. I hate body work, so I'll pay him to do it.

http://www.zmods.org/images/swap/10-30-05/swap_1396.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1415.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1409.jpg

Even the frame rails have been cleaned and prepped to perfection!
http://www.zmods.org/images/swap/10-30-05/swap_1413.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1414.jpg

The brake master leaked DOT3 and ate the paint off and caused some minor surface rust. No biggie.
http://www.zmods.org/images/swap/10-30-05/swap_1397.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1398.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1399.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1400.jpg

37 degree night, HAIL WOOD HEAT! Shop temp is 73 degrees! :D

http://www.zmods.org/images/swap/10-30-05/swap_1405.jpg

TT drivetrain and other junk awaiting use...
http://www.zmods.org/images/swap/10-30-05/swap_1406.jpg

Old NA motor.
http://www.zmods.org/images/swap/10-30-05/swap_1407.jpg

Other junk
http://www.zmods.org/images/swap/10-30-05/swap_1410.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1411.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1416.jpg

...and this is where it all began...
http://www.zmods.org/images/swap/10-30-05/swap_1417.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1418.jpg

http://www.zmods.org/images/swap/10-30-05/swap_1419.jpg

More to come as usual. :afro: