PDA

View Full Version : I Should have a .......

canyoncarver
08-31-2006, 08:26 PM
brake job and master cylinder brace install write-up posted after this weekend.

That is all.
freakonaleash1187
08-31-2006, 09:58 PM
what are you all doing in your brake job?
Twisted Six
08-31-2006, 10:02 PM
Sweet! A new writeup!
canyoncarver
08-31-2006, 11:20 PM
I'll be installing Brembo rotorz, new pads, SS lines, and a mbc brace. Then a full 5-point bleed job after flushing thru new fluid. I'm doing it on someone elses Z.

I have my BBK parts finally picked out for my car. Just waiting to need new brakes before I buy the parts. :cheers:
freakonaleash1187
09-01-2006, 03:00 PM
its not BBK, it is BMFBK. anyways, sounds like fun, i will be waiting for the write-up because i have never read how to change to SS lines.
JBender
09-01-2006, 03:25 PM
Wrong, it's BAMFBK :spin:
canyoncarver
09-01-2006, 06:16 PM
Wrong, it's BAMFBK :spin:I woulda said that If I were going with 14" rotorz. I'm only going with 12.8" tho.
Twisted Six
09-02-2006, 02:57 PM
My TT will be getting the Wilwood BMFBK with 14" rotors.... :) Best bang for buck IMO. The Brembo BBK (14" rotors) is insanely expensive, and only available for the front wheels.... :( The wilwood has a kit for all 4 corners, at half the price brembo charges for just the fronts.
canyoncarver
09-02-2006, 03:13 PM
Yeah, I'm going with the Wilwood 4-pots that will work on up to 13" rotors. I'm debating between the Stoptech 2-pc 350z rotorz and Wilwoods. Do you know the part numbers for the Wilwood hats that fit our cars?

Here are the calipers I'm gonna get --->>> CALIPER (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=130021768275&ih=003&sspagename=STRK%3AMEWA%3AIT)
I'll make my own adapters. :D
drewtiss
03-07-2009, 03:41 AM
Yeah, I'm going with the Wilwood 4-pots that will work on
ford f250 parts (http://www.autopartsdeal.com/ford_truck/f250/parts.html) up to 13" rotors. I'm debating between the Stoptech 2-pc 350z rotorz and Wilwoods. Do you know the part numbers for the Wilwood hats that fit our cars?

Here are the calipers I'm gonna get --->>> CALIPER (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=130021768275&ih=003&sspagename=STRK%3AMEWA%3AIT)
I'll make my own adapters. :D

Gotta check that out first. My friend told me to stick with Stoptech 2-pc 350z rotorz. I am not that familiar with this stuff.